Ultra2500 5.8GHz 64CH Pit Mode 2.5W FPV Transmitter 25mW/ 400mW/ 800mW/ 1500mW/ 2500mW/ Built in Mic Support IRC Tramp VTX MMCX 30.5mmx30.5mm M3 for RC Drones - Black
Description
- Type: N/P Switchable
- Camera Resolution: Without
- RC Drone Spare Parts: FPV Transmitter
- Frequency: 5.8GHz
- Interface Type: MMCX-Straight
- Power: 200-600mw
Orders shipped to Lithuania, Latvia, and Estonia may be subject to high additional customs duties. All applicable taxes and fees shall be borne by the recipient. To prevent unexpected expenses, we kindly advise customers in these regions not to place orders Specification:
| Model: | Ultra2500 64CH VTX |
| Input : | DC 7-36V(2-8S Battery) |
| Output: | 5V@600mA(Power 5V to camera) |
| Input impedance: | 75Ω |
| Protocol: | IRC Tramp |
| Antenna connector: | MMCX connector |
| Cable connector: | GH1.25-6P connector |
| Output power: | 25mW/400mW/800mW/1500mW/2500mW/Pit mode |
| Frequency tables: | 64 CH |
| Video format: | PAL/NTSC |
| Microphone: | Built in microphone |
| Size: | 36.5mmx36.5mmx12mm |
| Weight: | 15g(without cable) |
| Mounting holes: | 30.5mmx30.5mm(M3) |
Features:
1. 64CH VTX super-power,suitable for Long Rang fligh with good stability.
2. Six power levels: 25mW/400mW/800mW/1500mW/2500mW/Pit mode.
3. Two-layer board cooling structure,separate power BEC and main-board,reducing and shielding from the insinal interference.
4. Temperature control protection function that can prevent high temperature burning.
5. Wide input, supports 7V-36V input.
6. VTX control protocol is IRC Tramp,supports OSD parameter adjustment.
7. VTX built in microphone,real-time return of Drone's sounds.
8. Has 3 regional frequency tables to meet the needs of various regions.
9. One function buttons, three indicator lights, easy to operate.
10. Mounting holes is 30.5mmx30.5mm.
NOTE:
For BetaFligh fligh controller firmware above BetaFligh 4.1.0,you need upload a VTX Table to the fligh controller before using the remote control to modify the video transmitter parameters normally.
WARNING:
1. Install antenna before use.
2.To prevent overheating. provide constant airfiow and a well ventilated environment.Install a cooling fan if operating in confined conditions.
3. The 5V Output is just used for a Camera/Cooling Fan! Don't connect Power Input /Battery to 5V Output port. Otherwise the VTX will be damaged.
Pasckage included:
1 × Ultra 64CH VTX
1 x MMCX connector to SMA connector 82cm
1 × GH 1.25-6P connector cables 150mm