Signal Scanner 2.4G/5G Signal Usage Analyzer Router Management Assistant

Purpose: 
In an environment with too many Wi-Fi signals, or multiple signals occupying the same frequency, interference can result in poor Wi-Fi signal quality. This assistant allows you to easily see which frequency has the most signal and which is less active, enabling you to adjust your Wi-Fi signal and switch to a less active frequency to improve communication quality.

Functions:
1. Battery level display in the upper right corner of the screen.
2. Built-in 600mAh lithium battery, operating current approximately 160mA, standby time approximately 4 hours. 
3. Built-in lithium battery charging management circuit. Charging time is approximately 2 hours.
4. Uses a TYPE-C interface for convenient charging.
5. Charging voltage is 5V. A red light indicates charging, and a green light indicates full charge.
6. 2.4-inch TFT color display.

Instructions for Use:
1. Press and hold the button to power on; press and hold again to power off.
2. Press the button once to start scanning; press again to paus scanning.
3. The waveform at the top of the screen displays the Wi-Fi signals of all frequencies in the 2.4GHz band. Normally, only the strongest Wi-Fi signal is displayed per frequency. However, if multiple signals exist at the same frequency, a number is displayed below the corresponding coordinate scale. For example, displaying the number 5 indicates that 5 Wi-Fi networks are using the same frequency. The waveform below the screen corresponds to the 5GHz signal waveform. Interpretation is the same. Due to the greater number of 5GHz frequencies, it's impossible to mark all frequencies on the coordinate scale.

Package Included:
1 x Main Unit
1 x TYPE-C Charging Cable