Popular: power drill led strip rc car smart watch scooter tool set

Grizzly 008 600mW FPV VTX, 5g Ultralight 5.8GHz 64CH, 25/200/600mW Switchable, SmartAudio, Pit Mode, 20×20 MMCX For FPV Drone

$28.00
In Stock

Description

Power Without the Pork Most 600mW VTXs weigh like bricks and run hot enough to cook an egg. The Grizzly 008 throws out the rulebook. At just 5 grams including the MMCX antenna, it's one of the lightest switchable 600mW transmitters on the market. And with a peak current draw of only 310mA at full power, it sips battery while your competition's VTX gulps it down. Three Power Levels. One Smart Choice. Not every flight needs 600mW. The Grizzly 008 gives you three selectable power outputs: -25mW (120mA): Pit mode, bench testing, or close proximity whoop racing. Stay cool. Stay legal. Stay out of other pilots' feeds. -200mW (190mA): The sweet spot for freestyle and general flying. Solid penetration through trees and light structures without excessive heat or current draw. -600mW (310mA): Full send. Long-range exploration, concrete penetration, and dense environments where signal breakup isn't an option. Switch between them via the onboard button or remotely through SmartAudio—no landing, no disarming, no fuss. 64 Channels. Find Your Frequency. The upgraded 64-channel architecture spans 8 full bands (A/B/C/D/E/R/V/H) from 5362MHz to 5995MHz. Whether you're at a 40-pilot race event or flying solo in the mountains, a clean frequency is always waiting. The new V and H bands add extra breathing room beyond the standard 40CH most VTXs offer. SmartAudio + Button Control Configure everything remotely through your flight controller's OSD using SmartAudio, or use the intuitive onboard button with dual LED feedback. The 4-step configuration sequencee is fast and logical: * Channel (Red LED flash 1x → Blue LED indicates CH1-8) * Band (Red LED flash 2x → Blue LED indicates A-H) * Power (Red LED flash 3x → Blue LED indicates level) * Save & Exit (Long press to lock settings) Pit Mode toggles with a quick double-press -- enter 1-2 meter range for safe bench configuration without destroying everyone else's video at the event. Built to Disappear Standard 20×20mm mounting pattern with M2 holes fits virtually every modern race and freestyle frame. The 27×27×4.8mm footprint is compact enough for tight builds. MMCX antenna connector keeps the profile low and the connection secure. At 0.2mm PCB thickness with optimized layout, every millimeter serves a purpose. Cooler by Design Lower current draw means lower heat. The Grizzly 008 runs cooler than comparable 600mW VTXs straight out of the gate. An efficient power amplifier design minimizes wasted energy as heat. Just ensure reasonable airflow in your frame—this VTX does the rest. Overheat protection automatically downshifts power if temperatures creep too high, preventing thermal shutdown at the worst possible moment.


Specification:


Brand RXC
Model:  Grizzly 008 600mW VTX
Frequency 5.8GHz
Channels 64 CH ( 8 Bands: A/B/C/D/E/R/V/H)
Power Levels:  25mW (120mA) / 200mW (190mA) / 600mW (310mA)
Input Voltage  DC 7V-24V (2S-6S Direct)
5V Camera Output  Yes (Clean regulated 5V rail)
Antenna Port:  MMCX Ant
Control Interface  SmartAudio (UART) + Physical Button
Pit Mode  Yes (Double-press toggle, 1-2m range)
Overheat Protection  Yes (Auto power downshift)
Mounting Hole Spacing:  20 x 20mm (M2)
Pinout 5-Pin:  5V Out / GND / Video In / SmartAudio / 7-24V In
Dimensions:  27 × 27 × 4.8mm
PCB Thickness  0.2mm
Weight:  5g (with antenna)


Features * 600mW MAX POWER: Three switchable levels—25mW / 200mW / 600mW. From pit lane to long range, dial the power your flight demands. * 5 GRAMS ULTRALIGHT: Including MMCX antenna. One of the lightest 600mW VTXs available. Disappears into toothpicks, racers, and ultralight builds. * 64 CHANNELS / 8 BANDS: A/B/C/D/E/R/V/H full coverage. 5362-5995MHz range. Always find a clean frequency, even in crowded airspace. * SMART AUDIO + BUTTON CONTROL: Remote configuration via Betaflight OSD or manual control via onboard button with dual LED feedback. * PIT MODE READY: Double-press to toggle 1-2 meter ultra-low-power mode. Safe bench configuration. Respectful race-day etiquette. * LOWER CURRENT, LOWER HEAT: 310mA peak at 600mW. Efficient design runs cooler than competitors. Overheat protection auto-downshifts to prevent thermal failure. * 20×20 MOUNTING STANDARD: Fits all modern race and freestyle frames. 27×27×4.8mm compact footprint. * 5V CAMERA OUTPUT: Clean 5V rail to power your FPV camera directly—no separate BEC required. * MMCX ANTENNA INTERFACE: Secure, low-profile connector. Easy antenna swaps without wrenching on SMA barrels.


Frequency Chart


Band CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
A 5865 5845 5825 5805 5785 5765 5745 5725
B 5733 5752 5771 5790 5809 5828 5847 5866
C 5705 5685 5665 5645 5885 5905 5925 5945
D 5740 5760 5780 5800 5820 5840 5860 5880
E 5362 5399 5436 5473 5510 5547 5584 5621
R 5658 5695 5732 5769 5806 5843 5880 5917
V 5975 5955 5935 5769 5875 5835 5715 5675
H
5635 5600 5565 5530 5490 5455 5420 5995


[LED Status Guide]


LED Behavior  Meaning
Red Solid + Blue Solid  Normal Operation (Parameters Saved)
Red + Blue Twinkling  Pit Mode Active (1-2m Range)
Red Flash 1x  Channel Selection Mode (Blue = CH1-8)
Red Flash 2x  Band Selection Mode (Blue = A-H)
Red Flash 3x  Power Level Selection Mode (Blue = Level)

[Button Configuration – 4-Step Guide]


Step Action Red LED What You Set Blue LED Feedback
1 Long Press 1 Flash Channel (CH1-8) Flash count = Channel number
2 Long Press 2 Flashes Band (A-H)  Flash count = Band position
3 Long Press 3 Flashes  Power (25/200/600mW) Flash count = Power level
4 Long Press Solid Save & Exit Solid = Settings locked

Pit Mode: Double-press the button anytime to toggle ON/OFF.


Package Included: 1 x RXC Grizzly 008 600mW FPV VTX 1 x MMCX Antenna (5g total weight) 1 x Silicone Wiring Harness (5-Pin) 1 x User Manual