5.8G 48CH 600mW DC 7-24V FPV VTX Transmitter 1000TVL 2.8mm Lens Camera Support 2-4S Power for RC Models

Feature Transmit a clean, powerful 600mW signal across 48 channels on the full 5.8GHz band. With six frequency bands including RaceBand (A/B/C/D/E/R), the VTX covers every channel you need for solo practice, multi-pilot races, and crowded flying fields. A digital LED display shows band, channel, and frequency in sequencee after power-up, eliminating guesswork and dip-switch confusion at the field. Dial in your channel in seconds with the single-button control and digital interface. Press and hold to cycle through band selection (A–E), press again to pick your channel (1–8), and hold once more to lock the setting. The intuitive three-step process requires no tools, no app, and no manual reference card. A quick double-press toggles Pit Mode—the red dot on the display confirms the VTX is in ultra-low-power state, transmitting just enough signal for bench testing within 2–3 metres without blasting your fellow pilots. Keep your build light and cool with a 5-gram VTX that draws only 350mA at 12V on full 600mW output. The compact 30×20×8mm footprint fits tight racing frames, micro long-range builds, and cinewhoops where every gram and every milliamp counts. Wide 7–24V DC input accepts 2S to 6S LiPo packs directly—no separate BEC or step-down regulator required—reducing wiring complexity and potential failure points. Mount securely and connect reliably with the standard RP-SMA jack and included accessories. The RP-SMA female connector ensures a solid, low-loss link to your favourite 5.8GHz antenna. Flat and low-profile, the VTX sits flush on the stack or frame, with the antenna mount positioned for clean routing away from props and carbon fibre edges. At 5 grams including the antenna mount, you add race-grade transmission power without sacrificing your power-to-weight ratio.

Rely on pr0ven EWRF TS5823Pro hardware with straightforward setup and consistent performance. The digital display cycles through band, channel, and frequency on every boot, giving you instant visual confirmation of your settings before take-off. Whether you are chasing lap times, exploring long-range lines, or capturing cinematic footage, the 600mW output delivers the range and penetration you need without the heat and power draw of larger transmitters. Pit Mode keeps you competition-compliant and bench-safe with a double-press toggle.  Specifications  

Frequency Table