Eachine EV100 HDM1 to AV Converter Module with1080P HD Input, CVBS RCA Output, NTSC/PAL, Video & Audio Sync, Plug & Play, Complete Cable Set for Analog FPV Goggles - White

The Signal Bridge Your FPV Setup Is Missing You've got an HD VTX, an action camera, or a laptop feeding beautiful 1080P video. But your analog FPV goggles only accept AV (CVBS) input. You could replace your entire goggle setup. Or you could spend the equivalent of a few race batteries on the Eachine EV100 HDM1 to AV Converter and solve the problem permanently. 1080P In. AV Out. Nothing Lost. This isn't a cheap scaler that crushes your resolution into a blocky mess. The EV100 converter processes a wide range of HDM1 input resolutions—from 640×480 up to 1920×1080 at 60Hz—and outputs clean, stable CVBS video over standard RCA connectors. Your goggles receive a proper analog signal that's as sharp as the format allows. No screen tearing. No dropped frames. No conversion artifacts that make you miss gate edges. Video AND Audio. Perfectly Synced. Most budget converters handle video but butcher audio timing. The EV100 outputs both signals simultaneously through three RCA ports—Yellow for video, Red and White for stereo audio. When your drone's microphone picks up a motor surge or your simulator outputs engine audio, what you hear matches exactly what you see. This matters more than you think in high-speed proximity flying. Plug & Play Means No Drivers. No Software. No Waiting. Connect your HD source to the HDM1 input. Connect the RCA output to your goggles. Apply power via the included USB cable. Done. No driver installations. No configuration files. No resolution tweaking in arcane menus. The converter auto-detects the input resolution and handles the rest. You spend your time flying, not troubleshooting. NTSC and PAL. Covered. Whether your goggles expect NTSC_M, NTSC_J, or PAL, the EV100 outputs a compatible CVBS signal. This means it works with FPV goggles from every region, eliminating the format mismatch that causes rolling screens or black-and-white video on imported equipment. Complete Kit. No Missing Pieces. Open the box. Everything is there: 1. The converter module itself 2. USB power cable 3. 3.5mm to 3 RCA AV cable 4. HDM1 cable 5. User manual No separate accessory purchases. No "cable sold separately" disappointments. Just a complete conversion solution ready to deploy. 110 Grams. Fits in Your Kit Bag. At 66×55×20mm and 110 grams, the EV100 converter takes up less space than a spare battery. Keep it in your field bag for the day a fellow pilot shows up with an HD source and an analog goggle, or the day you want to pipe simulator footage into your flying headset for ultra-realistic practice. Features * TRUE PLUG & PLAY: No driver installation. No software configuration. Connect HDM1 input, RCA output, and USB power—ready in seconds. * 1080P FULL HD INPUT SUPPORT: Accepts resolutions from 640×480 to 1920×1080 @60Hz, including 720p, 1080i, and 1080p. Clean downscaling to CVBS without crushing image quality. * VIDEO & AUDIO SYNC OUTPUT: Three RCA ports (Yellow Video, Red/White Stereo Audio) output synchronized signals. No audio lag. No desync. Immersive FPV with real-time audio feedback. * NTSC & PAL CVBS OUTPUT: Compatible with NTSC_M, NTSC_J, and PAL formats. Works with FPV goggles from any region. No rolling screen. No black-and-white conversion errors. * HDM1 1.3 COMPATIBLE: Works with HD VTX modules, action cameras, laptops, media players, and any standard HDM1 output device. * COMPLETE CABLE SET INCLUDED: Converter module + USB power cable + 3.5mm to 3 RCA AV cable + HDM1 cable + user manual. No additional purchases needed. * COMPACT & PORTABLE: 66×55×20mm, 110g. Fits in any FPV gear bag. Light enough to carry as a permanent part of your ground station. * STABLE SIGNAL TRANSMISSION: High-quality cables minimize interference. Consistent performance flight after flight.

 

Package Included

1 x Eachine EV100 HDM1 to AV Converter Module
1 x USB Power Cable
1 x 3.5mm to 3 RCA AV Cable
1 x HDM1 Cable
1 x User Manual