5.8GHz Lollipop FPV Antenna, 5500-6000MHz, 3.5dBi, LHCP/RHCP, SMA/RP-SMA, 50Ω, RG141 Low Loss, 140mm, for VTX Goggles Racing Freestyle Long-Range Drone

The Signal Upgrade Your Drone Deserves Stock dipole antennas are the weakest link in your FPV chain. They're linear polarized—vulnerable to multipath interference that smears your image with ghosting and static. They're built to a cost, not a spec. The Lollipop changes everything. Circular polarization naturally rejects reflected signals that b0unce off walls, trees, and metal. RG141 low-loss cable preserves signal from VTX to antenna tip. The result: a cleaner feed, fewer dropouts, and range that matches what your VTX actually outputs. 5500-6000MHz Full Band. No Blind Spots. The Lollipop covers the entire 5500MHz to 6000MHz frequency range—every standard 5.8GHz FPV channel on every band. Raceband. Band A through R. Low band for long-range. High band for events. One antenna covers them all. No frequency-specific antennas to swap between flights. Circular Polarization. Choose Your Direction. Available in both LHCP (Left-Hand) and RHCP (Right-Hand) circular polarization. Match your entire fleet to one polarization for maximum signal transfer. The circular pattern naturally suppresses multipath interference—critical for indoor whoop racing, concrete bando flying, and crowded multi-pilot events where signals b0unce off every surface. 50Ω Precision Impedance. No Power Wasted. A precisely matched 50Ω impedance ensures your VTX power radiates into the air, not back into the board as heat. Generic antennas with inconsistent impedance can reflect 30-40% of your signal. The Lollipop's controlled impedance means more of your milliwatts actually reach the sky. RG141 Cable. Low Loss. High Flex. The 140mm feeder uses RG141 coaxial cable—a step above the thinnerr RG178 used in many budget antennas. Lower loss per meter means more signal at the antenna element. The flexible cable routes cleanly through frames and resists kinking. Heat shrink strain relief at the connector prevents the #1 antenna failure point: cable breakage at the solder joint. PC+ABS Shell. Bending Protection. Crash-Ready. The lollipop-shaped housing isn't just aesthetic—it's impact-resistant PC+ABS that protects the radiating element inside. The bending protection design at the base absorbs impact forces that would snap rigid antennas. It bends. It rebounds. It keeps transmitting.

Four Connector Options. Every Device Covered.

Key Features * 5500-6000MHZ FULL BAND COVERAGE: Every standard 5.8GHz FPV channel. No frequency blind spots. One antenna for all your bands. * LHCP & RHCP CIRCULAR POLARIZATION: Rejects multipath interference. Cleaner feed in complex environments. Match your fleet's polarization for maximum signal transfer. * 50Ω PRECISION IMPEDANCE: Perfect matching with standard FPV systems. Minimal signal reflection. Maximum power into the air.6 *RG141 LOW-LOSS CABLE: 140mm flexible feeder. Lower loss than RG178. Heat shrink strain relief at connector. Kink-resistant. * PC+ABS IMPACT-RESISTANT SHELL: Protects the radiating element. Bending protection design absorbs crash forces. Survives tumbles. * FOUR CONNECTOR OPTIONS: SMA / RP-SMA / MMCX / UFL (IPEX1). Universal compatibility with VTX, goggles, VRX, and AIO boards. * LIGHTWEIGHT: Adds negligible weight. Won't compromise agi1ity or flight performance.

Specifications:

Package included:
1 x 5.8G Lollipop FPV Antenna