1W 1000mW Adjustable VTX Camera 5.8GHz 48CH FPV AIO 700TVL CMOS SMA 2-4S with 5V Output Pit Mode FPV Transmitter for RC FPV Racing Drone

Feature 

- Adjust your transmission power across four levels—100mW, 200mW, 400mW, and 1000mW—to match any flying environment. Select 100mW for indoor whoop tracks and close-quarters practice, 200–400mW for general freestyle and racing, or the full 1000mW for long-range exploration and penetration through dense obstacles. Each power level displays its current draw (230mA to 490mA), letting you calculate battery impact precisely before take-off.

- Dial in your channel, band, and power level with a single button and dual LED feedback. Press and hold until the red LED flashes once to select channels (1–8, blue LED indicates position). Hold again for two red flashes to pick your band (A–R, 48CH total including RaceBand). Hold a third time for three red flashes to lock your power level. A final long press saves all parameters—red and blue LEDs stay solid to confirm transmission. Double-press any time to toggle Pit Mode for race compliance and bench testing within 1–2 metres.

- Power your camera directly from the VTX with a built-in 5V 300mA output. The integrated step-down regulator eliminates the need for a separate BEC or additional wiring between your flight controller and camera. Connect your CMOS 700TVL camera directly, reduce solder points, and keep your build cleaner and lighter—one less failure point in the air.

- Capture clear analog footage with the included CMOS 700TVL camera through a standard SMA antenna interface. The SMA female connector accepts your preferred 5.8GHz antenna for optimised signal strength and directionality. Strong power supply shock resistance keeps the video feed stable during aggressive punches, hard landings, and high-vibration flight conditions that would cause lesser VTX units to flicker or black out. 

- Build light and flexible with wide 2–4S LiPo compatibility and an all-in-one VTX camera form factor. Direct battery input from 2S to 4S packs eliminates external voltage regulators. The compact board design integrates VTX, power regulation, camera output, and Pit Mode control into a single unit—reducing stack height, simplifying wiring, and freeing up frame space for other components. 48 channels across six bands including full RaceBand coverage ensure you always find a clean frequency.

  Specification:

LED Operation Guide

Frequency Table