Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
4GE VOIP CATV WIFI6 XPON ONU HSS-G710AX
The BT-G710AX model ONU is a high-performance, low-power consumption FTTH optical network unit designed to meet the application requirements of various data services in FTTH networking scenarios. This advanced device is equipped with dual-band Wi-Fi, supporting superior wireless transmission performance with standards 11n, 11ac, and 11ax. It is compatible with a wide range of third-party OLT, including those from Huawei, ZTE, Fiberhome and BT-PON, and can operate in both EPON and GPON modes, switching automatically.
Support EPON/GPON mode and switch mode automatically
GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
GPON:8 T-CONTs, 32 GEM Ports
Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance
Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Bi-directional FEC
Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
Qos supports PQ, WRR, and CAR queue scheduling
Provide Maximum rate 1775Mbps Wireless interface, 2T2R external antenna, support multiple
SSID Settings
Support DDSN, ALG, DMZ and UPNP
Provide POTS interface, support SIP protocol，POTS integrated circuit test complies GR-909
Support CATV interface for Video Service，support to turn off CATV functionality
4GE VOIP CATV WIFI6 XPON ONU BT-G710AX
| Size | 205*140*30mm |
| 205*140*30mm | 1*GPON/EPON |
| User interface | 4GE LAN +1 VOIP +2.4G &5.8G WIFI 6 |
| Indicator light | POWER/PON/LOS/LAN1/LAN2/LAN3/LAN4/TEL1/USB2.4G/5G/WPS |
| Button | Power switch Button, Reset Button, WLAN Button, WPS Button |
| Weight | 300g |
| Power adapter input | 100V～240V AC，50Hz～60Hz |
| PowerSupply requirement | 12V DC，1.5A |
| Power consumption | <10w |
| Working temperature | -10°C ~ +45°C |
| Environment humidity | 5% ~ 95% (Non-condensing) |
| PON Interface | |
| Module type | Class B+ SC/UPC |
| Working wavelength | PON: up 1310nm，down 1490nm |
| TX Optical power value | 0.5～4dbm |
| RX Optical power sensitivity | -28dBm |
| Transmission distance | 0～20km |
| Transmission rate | GPON:Up 1.244Gbps；down 2.488GbpsEPON:Up 1.244Gbps；down 1.244Gbps |
| Ethernet Interface | |
| Interface type | 4*RJ45 |
| Interface parameters | 4*10/100/1000Mbps auto adaptive Ethernet interfaces |
| Wireless | |
| Working mode | IEEE 802.11 b/g/n/AC/AX |
| Antenna pattern | External 2*2T2R External antenna |
| Antenna gain | 5dBi |
| Wireless bandwidth | Support 20MHz/40MHz/80MHz |
| Interface rate | Maximum rate 1775Mbps |
| SSID | Up to 4 SSID broadcasts are supported |
| POTS interface | |
| Interface type | 1* RJ11 |
| Voice agreement | SIP |
| Codecs | G.711/G.723/G.726/G.729 |
| Integrated circuit protocol | Gr-909 protocol is applicable |
| CATV Interface | |
| Optical receiving wavelength | 1550±10nm |
| Optical reflection loss | ≥45dBm |
| RF, WDM, optical power | +2~-15dBm |
| RF frequency range | 47~1000MHz, RF output impedance: 75Ω |
| RF output level | 78dBuV |
| AGC range | 0~-12dBm |
| MER | ≥32dB@-15dBm |
BT-G710AX_Datasheet
The BT-G710AX model ONU is a high-performance, low-power consumption FTTH optical network unit designed to meet the application requirements of various data services in FTTH networking scenarios. This advanced device is equipped with dual-band Wi-Fi, supporting superior wireless transmission performance with standards 11n, 11ac, and 11ax. It is compatible with a wide range of third-party OLT, including those from Huawei, ZTE, Fiberhome and BT-PON, and can operate in both EPON and GPON modes, switching automatically.
Support EPON/GPON mode and switch mode automatically
GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
GPON:8 T-CONTs, 32 GEM Ports
Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance
Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Bi-directional FEC
Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
Qos supports PQ, WRR, and CAR queue scheduling
Provide Maximum rate 1775Mbps Wireless interface, 2T2R external antenna, support multiple
SSID Settings
Support DDSN, ALG, DMZ and UPNP
Provide POTS interface, support SIP protocol，POTS integrated circuit test complies GR-909
Support CATV interface for Video Service，support to turn off CATV functionality
