Address
304 North Cardinal St.
Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

1ge 1fe Voip Wifi Catv Onu Modem HSS-211xr

1GE+1FE+1VOIP+2.4G WIFI+CATV(external antennas)

♦ Support EPON/GPON mode and switch mode automatically
♦ GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
♦ GPON:8 T-CONTs,32 GEM Ports
♦ Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance
♦ Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
♦ Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
♦ Support PPPoE/ Static IP/ DHCP
♦ Support IPv4, IPv6 and IPv4/IPv6
♦ Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
♦ Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
♦ Qos supports PQ, WRR, and CAR queue scheduling
♦ Provide 300Mbps 2.4GHz Wireless interface,2T2R external antenna, support multiple SSID Settings,
♦ Support DDSN, ALG, DMZ and UPNP
♦ Provide POTS interface, support SIP protocol,POTS integrated circuit test complies GR-909
♦ Support CATV interface for Video Service

BT-211XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function. With compact structure and small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.

BT-211XR is an XPON product that can be adapted to EPON and GPON networks without replacing equipment and firmware.

Optical Networks 1ge 1fe Voip Wifi Catv Bt-211xr Onu Modem

 

1ge 1fe Voip Wifi Catv Onu Modem Bt-211xr

Size(L*W*H) 168mm (L) *130mm (W) *28mm (H)
Optical signal access 1*GPON/EPON
User interface 1GE+1FE+VOIP+2.4G WLAN +CATV
Indicator light POWER、PON、LOS、LAN1、LAN2、TEL、WIFI、WPS 、CATV
Button Power switch Button, Reset Button, WLAN Button, WPS Button
Weight 230g
Power adapter input 100V~240V AC,50Hz~60Hz
PowerSupply requirement 12V DC,1.5A
Power consumption <10w
Working temperature -10°C ~ +45°C
Environment humidity 5% ~ 95% (Non-condensing)
PON Interface
Module type Class B+ SC/APC
Working wavelength up 1310nm,down 1490nm
TX Optical power value 0.5~4dbm
RX Optical power sensitivity  -28dBm
Transmission distance 0~20km
Transmission rate GPON:Up 1.244Gbps;down 2.488Gbps
EPON:Up 1.244Gbps;down 1.244Gbps
Ethernet interface
Interface type 2* RJ45
Interface parameters 1*10/100/1000Mbps and 1*10/100Mbps
Wireless
Working mode IEEE 802.11 b/g/n
Antenna pattern External 2T2R External antenna
Antenna gain 5dBi
Wireless bandwidth Support 20MHz/40MHz
Interface rate Maximum rate 300Mbps
SSID Up to 4 SSID broadcasts are supported
POTS Interface
Interface type 1* RJ11
Voice agreement SIP
Codecs G.711/G.723/G.726/G.729
Integrated circuit protocol Gr-909 protocol is applicable
CATV Interface
Optical receiving wavelength 1550±10nm
Optical reflection loss ≥45dBm
RF, WDM, optical power +2~-15dBm
RF frequency range 47~1000MHz,  RF output impedance: 75Ω
RF output level 78dBuV
AGC range 0~-12dBm
MER ≥32dB@-15dBm

BT-211XR_Datasheet

BT-211XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function. With compact structure and small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.

BT-211XR is an XPON product that can be adapted to EPON and GPON networks without replacing equipment and firmware.

Optical Networks 1ge 1fe Voip Wifi Catv Bt-211xr Onu Modem