Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
1ge 3fe Voice Wifi Catv Onu HSS-311xr
1GE+3FE+VOIP+2.4G WIFI+CATV(external antennas）
♦ Support EPON/GPON mode and switch mode automatically
♦ GPON:Compliance with IEEE 802.3ah & itu-t g.984.x standard
♦ GPON:8 T-CONTs,32 GEM Ports
♦ Integrate OMCI(GPON)/OAM(EPON) and TR-069 remote configuration and maintenance
♦ Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
♦ Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
♦ Support PPPoE/ Static IP/ DHCP
♦ Support IPv4, IPv6 and IPv4/IPv6
♦ Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
♦ Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
♦ Qos supports PQ, WRR, and CAR queue scheduling
♦ Provide 300Mbps 2.4GHz Wireless interface,2T2R external antenna, support multiple SSID Settings,
♦ Support DDSN, ALG, DMZ and UPNP
♦ Provide POTS interface, support SIP protocol，POTS integrated circuit test complies GR-909
♦ Support CATV interface for Video Service
BT-311XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function.With compact structure and small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.BT-311XR is an XPON product that can be adapted to EPON and GPON networks without replacing equipment and firmware.
Fttx Network 1ge 3fe Voice Wifi Catv Bt-311xr Bt-Pon Zte Onu
1ge 3fe Voice Wifi Catv Onu Bt-311xr
| Size（L*W*H） | 192mm (L) *148mm (W) *35mm (H) |
| Optical signal access | 1*GPON/EPON |
| User interface | 1GE+3FE+2.4G WLAN+1USB+CATV |
| Indicator light | POWER、PON、LOS、LAN1、LAN2、LAN3、LAN4、USB、2.4G、WPS、CATV |
| Button | Power switch Button, Reset Button, WLAN Button, WPS Button |
| Weight | 250g |
| Power adapter input | 100V～240V AC，50Hz～60Hz |
| Power supply requirement | 12V DC，1.5A |
| Power consumption | <10w |
| Working temperature | -10°C ~ +45°C |
| Environment humidity | 5% ~ 95% (Non-condensing) |
| PON Interface | |
| Module type | SC/APC |
| Working wavelength | PON：up 1310nm，down 1490nm ；CATV：1550nm |
| TX Optical power value | 0.5～4dBm |
| RX Optical power value | -28dBm |
| Transmission distance | 0～20km |
| Transmission rate | GPON:Up 1.244Gbps；down 2.488Gbps |
| EPON:Up 1.244Gbps；down 1.244Gbps | |
| Ethernet interface | |
| Interface type | 4* RJ45 |
| Interface parameters | 1*10/100/1000Mbps and 3*10/100Mbps |
| Wireless | |
| Working mode | IEEE 802.11 b/g/n/ |
| Antenna pattern | External 2T2R External antenna |
| Antenna gain | 5dBi |
| Wireless bandwidth | Support 20MHz/40MHz |
| Interface rate | 2.4G WLAN：Maximum rate 300Mbps |
| SSID | Up to 4 SSID broadcasts are supported |
| CATV Interface | |
| Optical receiving wavelength | 1550±10nm |
| Optical reflection loss | ≥45dBm |
| RF, WDM, optical power | +2~-15dBm |
| RF frequency range | 47~1000MHz, RF output impedance: 75Ω |
| RF output level | 78dBuV |
| AGC range | 0~-12dBm |
| MER | ≥32dB@-15dBm |
BT-311XR_Datasheet
BT-311XR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function.With compact structure and small appearance, it is a kind of FTTH optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.BT-311XR is an XPON product that can be adapted to EPON and GPON networks without replacing equipment and firmware.
