Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
1GE HGU xPON ONU HSS-G113
1GE HGU ONU
♦ Compatible with 95% Third-party OLTs (Including Huawei/ZTE/Fiberhome/BT-PON and so on)
♦ Spport EPON/GPON mode and switch mode automatically
♦ Support Route PPPoE/DHCP/Static IP and Bridge mode
♦ Support ONU auto-discovery/Link detection/remote upgrade of software
♦ Support IPv4/IPv6 dual mode
♦ Support Firewall function and IGMP multicast feature
♦ Support LAN IP and DHCP Server configuration
BT-G113 model ONU is a user terminal device independently developed by BTPT in line with such industrial background. The device has built-in two-layer switching function. It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption. BT-G113 ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
GPON working mode Compliance with IEEE 802.3ah & itu-t g.984.x standard
GPON:8 T-CONTs,32 GEM Ports
EPON working mode compliant with IEEE 802.3ah specification and OAM protocol
Supports the WEB configuration function
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Layer 3 Home Gateway/CPE features with Hardware NAT, supports Route mode, etc
Supports the configuration of Ethernet interface rates, working modes,MDI/ MDIX
auto-negotiation mode, and Pause flow control
Provides performance statistics on all Ethernet lines
Support multicast IGMP snooping
Supports the L2 wire speed forwarding
Supports the AES-128 algorithm for data encryption of downlink data
1GE HGU xPON ONU BT-G113
| Size（L*W*H） | 78*76*23mm |
| Optical signal access | EPON/GPON |
| User interface | 1GE |
| Indicator light | POWER/PON/LOS/LAN |
| Button | Power switch Button, Reset Button |
| Weight | 95g |
| Power adapter input | 100V～240V AC，50Hz～60Hz |
| PowerSupply requirement | 12V DC，0.5A |
| Power consumption | <6w |
| Working temperature | -10°C ~ +45°C |
| Environment humidity | 5% ~ 95% (Non-condensing) |
| PON Interface | |
| Module type | SC/UPC or SC/APC |
| Working wavelength | up 1310nm，down 1490nm |
| TX Optical power value | 0.5～4dbm |
| RX Optical power sensitivity | ≤-28dBm |
| Transmission distance | 0～20km |
| Transmission rate | GPON:Up 1.244Gbps;down 2.488GbpsEPON:Up 1.244Gbps;down 1.244Gbps |
| Ethernet interface | |
| Interface type | RJ45 |
| Interface parameters | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces |
BT-G113_Datasheet
BT-G113 model ONU is a user terminal device independently developed by BTPT in line with such industrial background. The device has built-in two-layer switching function. It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption. BT-G113 ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
GPON working mode Compliance with IEEE 802.3ah & itu-t g.984.x standard
GPON:8 T-CONTs,32 GEM Ports
EPON working mode compliant with IEEE 802.3ah specification and OAM protocol
Supports the WEB configuration function
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Layer 3 Home Gateway/CPE features with Hardware NAT, supports Route mode, etc
Supports the configuration of Ethernet interface rates, working modes,MDI/ MDIX
auto-negotiation mode, and Pause flow control
Provides performance statistics on all Ethernet lines
Support multicast IGMP snooping
Supports the L2 wire speed forwarding
Supports the AES-128 algorithm for data encryption of downlink data
